Holding BUTTON 1 during boot will switch the pedal to WiFi mode.Bypass mode, invoked by long pressing BUTTONS 3 and 4 simultaneously, allows adjusting effect levels to match your raw pickup output.Now with remote guitar TUNER display! Long press BUTTONS 1 and 2 simultaneously, or turn it ON from the app or on the amp. Long press BUTTON 3 to adjust current effect parameters: use BUTTONS 2 and 4 to decrement/increment, BUTTON 1 to cycle thru parameters and long press BUTTON 3 to save your edits back to the amp.Long press (more than 1s) BUTTON 1 to switch between Effect mode and Preset mode.Stand-by mode added to reduce power when disconnected - light or deep ESP32 sleep mode will be configured automatically depending on GPIOs of the buttons and logical levels choosen in your build.Also tested on WEMOS LOLIN32 Lite with battery support. Inter-operable with both conventional and Heltec ESP32 modules.Graphically display the effect state on the display.Switch on and off all four major effects dynamically.Switch presets either on footswitch, app or Spark to update display.Supports the most common DIY display types: SSD1306 and SH1106. Allows connection of the app for full simultaneous control.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |